manualshive.com logo in svg

Tadiran Telecom Coral IPx 800 Series, Installation Procedure And Hardware Reference Manual, Page: 259 / 400

Share
Download
Tadiran Telecom Coral IPx 800 Series Installation Procedure And Hardware Reference Manual Download Page 259

Cage Description

6-19

Cage D

escri

ptio

n an

d In

stall

ati

on 

6

Replacing a DC Power Fuse

1.

Verify that the DC power source is disconnected from the cage.

2.

Open the DC power cover. See 

page 6-16, Opening the DC Power Cover

 for details.

3.

Replace only with the same type and rating of fuse. A spare fuse is located on the 
DC power cover.

4.

Close the DC power cover. See 

page 6-17, Closing the DC Power Cover

 for details.

5.

Replace the spare fuse on the DC power cover with the same type and rating of 
fuse.

Electrical Hazard. Contact with live wires could cause shock, burn, or death. Verify that 

all DC power is disconnected from the cage before opening.

Summary of Contents for Coral IPx 800 Series

















































































































































































































































































































































































































Reviews:

No comments