Tadiran Telecom Coral IPx 800 Series, Installation Procedure And Hardware Reference Manual

Page: 279 / 400

Cage Description
6-39
Coral
IPx 800
M
Ma
in Ca
ge Descript
ion
6
6.2
Coral IPx 800M Main Cage
Description
This section describes the main features of the Coral IPx 800M (main) cage. For
information on how to configure the system, see
page 6-53, System Configuration Options
.
The IPx 800M main cage is the “nerve center” of the Coral IPx 800 system. It includes
the main control cards, peripheral cards, service cards, power supply unit and the
system configuration jumpers. The main cage includes eleven card slots: one service
slot, eight peripheral slots and two card slots for the control cards. The slot at the
extreme left of the cage is reserved for the power supply unit.
For a list of components supplied with the IPx 800M cage, see
Table 2-5 on page 2-11
.
The card section of the main cage includes eleven card slots and one power supply
unit slot. See
Figure 6-38
. The first two right slots are reserved for the common control
cards (MEX-IP2 and HDC). For further information, see
Chapter 8
. The following eight
universal I/O slots, numbered 1-8, can house any shared service or peripheral cards.
Slot 9 is reserved for a service card. Slots 4 and 5 are configured by the manufacturer
to house primary and secondary clock synchronization digital trunk cards. The slot at
the extreme left side is reserved for the power supply unit.
Table 6-1
describes the
cards that are inserted into the card slots for Coral IPx 800M.
Table 6-1 Coral IPx 800M
Card Slot Configuration
for Main Cage
1 Circuit Card Slots
Slot Name Contains Rear RJ-45
Connection Universal
I/O Slot
CONTROL
CARDS MEX-IP2 control card (with optional
DBM/DBX or MAP/CLA
daughterboard) Yes *
*For more information, see page 6-12, LAN RJ-45 Connectors .
No
HDC quad group controller card No No
Slot 1-8 Any peripheral or shared service card Yes Yes
Slot 9 Shared service card Yes No
POWER SUPPLY PS19 AC, DC, or DC-D unit No No