Synel SY-760, User Manual

Page: 25 / 106

-
23
1 Entering Technician Mode
Swipe an authorized badge or press the UP/DOWN keys simultaneously 6 times.
The display screen flashes and then displays the version then changes to display the TECHNICIAN
MODE and the time and date alternately, (time&date are adjusted from a PC).
2 Entering SETUP mode
When you enter Technician mode you can either EXIT or SET. Choose SET.
Adjusting the Real time clock - RTC (N/Y)
This adjustment option is for internal clock calibration purposes.
Setting the date and time
The date is in DD.MM.YYYY format
Note: Setting date and time is enabled only when defining the system parameter in the SYncomm
software: Edit Program--> System--> Badge type choose S (System Administrator)!
Adjust host baud rate
Available baud rates: 9600, 19200, 38400, 57600, and 115200.
Adjust fingerprint unit baud rate
Available baud rates: 9600, 19200, 38400, 57600, and 115200.
Adjust printer baud rate
The available baud rates are: 9600, 19200, 38400, 57600, and 115200.
Adjust station ID