Synel SY-760, User Manual

Page: 32 / 106

-
30
Host Port
Back to WIFI diagram
Synel applications use the default port number=3734. However, you may change this according to your specific needs. Use the
numeric keys to change the port number.
Disconct Sec
Back to WIFI diagram
Disconnect seconds defines the number of waiting seconds before reverting to offline mode. Click 03 to enable a fast disconnection.
DHCP
Back to WIFI diagram
To automatically assign a dynamic IP address to your terminal choose Y.
Note: If no IP address is defined under My IP Address, you must use DHCP.
Keyboard type
Specifies if the input keyboard is an Alphanumeric or Hexidecimal keyboard.
SSID
Back to WIFI diagram
( Service Set Identifier) -
Entered in HEX form. Up to 26 characters.
The sequence of characters identifying the wireless local area network, allowing the stations to connect to a
specific network when multiple independent networks operate in the same physical area.
Authentication
Back to WIFI diagram
Specifies the method of authentication. Set by drilling down and selecting the parameters:
Open
Open
(
Entered in HEX form.)
WiFi WEP
None
64 bit
128 bit
Shared Key
Back to WIFI diagram
Set by drilling down and selecting the parameters entered in HEX form.
Open
When chosen the following is later
WEP Security
choose: