Synel SY-760, User Manual

Page: 27 / 106

-
25
work collisions. Use the numeric keys to define your required polling time.
MAC SEND (Y/N)
If you want to confirm sending your terminal’s network MAC address to the host. Then after exiting technician
mode the terminal will send the host a “Hardware configuration network” message informing it of its MAC
address, IP etc.
My MAC Address
Displays your MAC address on your terminal’s prompt. here your terminal’s MAC address will be displayed.
My IP Address
Press line up/down to view the TCP/IP address of the terminal. Use the numeric keys to enter the IP Address.
Gateway Address
Press line up/down and key-in the required gateway address.
Remote Address
Press line up/down to view the TCP/IP address of the personal computer on which the SY-Server runs. Use the
numeric keys.
Subnet Mask
The subnet mask is the network address plus the bits reserved for identifying the subnetwork. Use the
numeric keys to determine the terminal’s subnet mask affiliation within your local net.
My Port
TCP/IP enables connecting multiple applications via the same address. The port number selected here is the
application identification number used by the computer when communicating with the terminal. Synel applica-
tions use the default port number = 3734 (a designated Synel port). However, you may change this according
to your specific needs.
Host Port
Synel applications use the default port number=3734. However, you may change this according to your spe-
cific needs. Use the numeric keys to change the port number.
Disconct Sec
Disconnect seconds defines the number of waiting seconds before reverting to offline mode. Click 03 to enable
a fast disconnection.
DHCP (Y/N)
To automatically assign a dynamic IP address to your terminal choose Y.
Note: If no IP address was defined under My IP Address, then you must use DHCP, so the only option is Y.