Synel SY-760, User Manual

Page: 81 / 106

-
79
6 Using POE
When using POE on the terminal you will need to make the following changes:
CPU Board REV-D:
JP104 should be shorted / P101 should have 7 PINs.
Network cars type B:
V2 should be compatible with POE.
C6/R7/8/9/10 should be removed
P2 Should be 7 PIN
JP13 should be on (1-2)
Net Card Type F:
R1/R2 should be removed / P11 should be mounted /
P2 should have 7 PINs / JP13 should be on (1-2).
For more details please refer to the BOM & scheme file of these two boards.
When using POE use the additional POE-DC2DC board using the Ag90120-S DC2DC module. The
maximum output power is 9Watt, this means that the over-all power consumption of the POE-
terminal with this module is less than 9Watt. Other modules can be used if you need more power.