Symbol WSS 1000, Product Reference Manual

Page: 70 / 133

6-1
Chapter 6
Operating the WSS 1000
Power On and Off
Because the WWC 1000 is battery powered, it is important to save power whenever possible.
The period of time that the wrist computer can be used before recharging or replacing the
battery can be increased by turning the wrist computer off when not entering data.
When powered off, the WWC 1000 saves power by not performing process or display
functions. Applications or data in memory are retained. Before the wrist computer powers
up, it checks the battery for enough power to ensure reliable operation and data storage.
When powered on, the display is restored and processing continues at the point where it was
when the wrist computer was powered down.
Powering the WWC 1000 on does not boot the system or initialize either the application or
data. For more information regarding initialization, refer to
Chapter 3, Batch and Spectrum
One Initialization or Chapter 4, Spectrum24
®
RF Terminal Setup .
Normal Power
To power the WWC 1000 on or off, press the Power button on top of the WWC 1000.
Figure 6-1. Power Button
Power Button