3-2
WSS 1000 Product Reference Guide
Set up for Initialization
1. Verify that the cradle is connected to the host PC. Refer to
.
2. Place the WWC 1000 in the cradle and power it off.
Figure 3-1. Placing the WWC 1000 in the Cradle
Loading an Application
Note: To cancel communications at any time during the session, press
CLEAR on the WWC 1000. The session stops immediately.
To download an application, initiate the communications software on the host computer and
WWC 1000.
The WWC 1000 must be connected to the host through a cradle to program
the EEPROM.
Note: Communication parameters specified on host and WWC 1000 must
match. These parameters typically are:
38400 bps
7 bit data
Odd parity
None
Summary of Contents for WSS 1000
