3-6
WSS 1000 Product Reference Guide
If the host is not ready or the cable is not connected between the host PC and cradle,
the wrist computer displays:
Awaiting DSR
2. Press <ENTER> on the host computer. SENDHEX begins transmitting the program
image. When communications are established, the WWC 1000 displays:
Program loader
Receiving: XXXX
where XXXX is the program segment address being transferred.
3. When the transmission is complete, the WWC 1000 displays:
Program loader
Status 0000
A status of 0000 (all zeros) indicates a successful transfer. Other status values
indicate an error. These values are provided in Appendix C.
Ending Communications
To return to the Command Mode main menu:
1. Press <CLEAR> on the WWC 1000.
2. Power down the WWC 1000.
3. Remove the WWC 1000 from the cradle.
4. Reboot the WWC 1000 using the appropriate cold boot sequence described in
Booting the WWC 1000 on page 6-3
.
Summary of Contents for WSS 1000
