Symbol WSS 1000, Product Reference Manual

Page: 94 / 133

7-11
Maintaining the WSS 1000
Set the range and press <ENTER>.
7. The wrist computer displays a range verification screen. For example:
RAM 0000 3FFF
NVM C839 DFFF
EMS None
Correct?
If the values are correct, press <ENTER>. If the values are not correct, press
<CLEAR> to clear the fields and select new values.
8. Specify the baud rate. Use the up and down arrows to scroll through the list of baud
rates until the correct rate is displayed, and press <ENTER>. (Flow control may be
necessary at 38400 bps and higher.)
9. Specify the data bits. Press <7> or <8>, or use UpArrow and DownArrow to display
7 or 8, and press <ENTER>.
Note: If you select 8 data bits, the program selects No parity and skips the
next screen.
10. Specify parity type. Use UpArrow and DownArrow to display a parity option, or
press the first letter of a parity option (Even, Odd, None, Space, or Mark) and press
<ENTER>.
11. Set flow control. Use UpArrow and DownArrow to display the flow control options,
or press the first letter of an option (None, Xon/Xoff, or RTS/CTS) and press
<ENTER>.
Start Communications
1. The wrist computer is ready to send the data to the host PC and displays:
Comm Parameters
Start? <ENT>
2. Verify that the host is ready to receive data.
3. Press <ENTER> on the wrist computer.
While data is being transferred, the wrist computer displays a report of the 1 KB
range being transferred: