7-4
WSS 1000 Product Reference Guide
Error Messages
If ERR3000 is loaded in the system configuration, the wrist computer displays the following
messages to indicate error conditions that affect system performance. A message is usually
accompanied by one or more beeps, after which the system returns to its previous status.
The application can change the actual wording of the messages or disable messages. The
messages listed in
are representative. Refer to the application’s documentation for
further information.
Table 7-1. Error Messages
Message
Explanation
Low Battery
The battery pack should be recharged or replaced
soon.
Dead Battery
Replace or recharge the battery pack immediately.
After this message is displayed, the system shuts off.
You may not be able to power it on again until the
battery pack is charged.
Power Fault
The last power off was caused by a power failure. This
occurs, for example, if the battery pack is removed
while the wrist computer is on or the batteries fail
suddenly.
Summary of Contents for WSS 1000
