4-6
WSS 1000 Product Reference Guide
b. To change the Net Id, select Net Id from the CFG24 Menu. The Net Id screen is
displayed.
Figure 4-3. Net Id Screen
To change the current Net Id value, backspace over the current value and type a
new value, in hexadecimal format, in the range 101 to 1FE. Alphabetical hex
values can appear in upper or lower case.
Press <ENTER> to effect the change. Press <CLEAR> to exit without changes.
c. Select Subnet Mask from the main configuration menu. The Subnet Mask screen
is displayed.
Figure 4-4. Subnet Mask Screen
To change the current Subnet Mask setting, backspace over the current value and
type a new value, in decimal form. Each part of the four-part address must be in
the range 0 to 255.
Press <ENTER> to effect the change. Press <CLEAR> to exit without changes.
NET ID
Enter Net Id(hex):
150
BkSp, Clear, Enter
SUBNET MASK
Enter Subnet Mask:
255.255.255.0
Bksp, Clear, Enter
Summary of Contents for WSS 1000
