Symantec PCANYWHERE - V12.5, User Manual

Page: 214 / 329

4 In the Caller Properties window, on the Privileges tab, select one of the
following:
Gives the user full access rights. Superuser
Limits access rights.
Select the options for which you want to allow or restrict
access.
Specify individual caller
rights
5 To let the remote user run an automated task after logging on, in the
Command to execute after connect box, type the command information that
is needed to run the program.
6 Click OK.
Setting time limits for callers
Unless the host is configured as a conference host, only one remote user can
connect to a host computer at a time. Other remote users are denied service until
the original remote user disconnects. You can protect the host computer from
denial of service by limiting the length of time that a user can stay connected and
by configuring the host to automatically disconnect after a specified length of
inactivity.
This option sets a time limit for only the users or group of users who are assigned
to the caller account. When you set a time limit for a session, you should ensure
that you allow remote users sufficient time to perform their tasks.
You can also set limits to prevent users from connecting at specific days and times.
See “Blocking connections by days or times” on page 215.
To set time limits for callers
1
In the Symantec pcAnywhere window, in Advanced View, on the left
navigation bar, click Hosts.
2 In the right pane, under Hosts, right-click the connection item that you want
to configure, and then click Properties.
3 In the Host Properties window, on the Callers tab, right-click the caller item
that you want to configure, and then click Properties.
4
In the Caller Properties window, on the Privileges tab, click Specify individual
caller rights.
Securing your computer and sessions
About access rights
214