Symantec PCANYWHERE - V12.5, User Manual

Page: 158 / 329

To start or stop a service
1 In the Session Manager window, on the left navigation bar, under Session
Manager, click Remote Management.
2
Under Remote Management, click Services.
3
In the right pane, right-click the service that you want to change, and then
select one of the following:
■
Start Service
■
Stop Service
■
Pause Service
■
Resume Service
Changing the startup mode of a service
Use this procedure to change the startup mode of a service to automatic or manual
or to disable the service. Before you stop or disable a service, check its dependencies
to determine if other services depend on it.
See “Viewing dependencies for a service” on page 159.
For more information, see the Windows documentation.
To change the startup mode of a service
1 In the Session Manager window, on the left navigation bar, under Session
Manager, click Remote Management.
2 Under Remote Management, click Services.
3
In the right pane, right-click the service that you want to change, and then
select the startup mode.
Changing the logon properties for a service
By default, the operating system assigns most services to the local system account.
You can reassign the service to a specific user account instead.
For more information, see the Windows documentation.
To change the logon properties for a service
1
In the Session Manager window, on the left navigation bar, under Session
Manager, click Remote Management.
2 Under Remote Management, click Services.
3 In the right pane, double-click the service that you want to change.
Supporting computers and servers remotely
What you can do during a remote management session
158