Symantec PCANYWHERE - V12.1, User Manual

Page: 194 / 321

To run a command queue file from the Command Queues window
1
In the Symantec pcAnywhere window, on the left navigation bar, under
pcAnywhere Manager, click Command Queues.
2
In the right pane, under Command Queues, double-click the command queue
file that you want to run.
Running a command queue file from the Remotes or Quick
Connect windows
If you start a command queue from the Remotes or Quick Connect windows,
pcAnywhere prompts you for the name of the command queue file and then for
the pcAnywhere caller credentials that are needed to log on to the host computer.
If you are connecting to multiple host computers, pcAnywhere lets you send these
credentials to the other host computers. If these credentials are not correct, you
will be prompted to type them again.
To run a command queue file from the Remotes or Quick Connect windows
1
In the Symantec pcAnywhere window, on the left navigation bar, under
pcAnywhere Manager, select one of the following:
■
Remotes
■
Quick Connect
2
In the right pane, do one of the following:
■
To run a command queue file by using the connection settings that you
configured in a remote connection item, in the right pane, right-click the
connection item that you want to use, and then click Start Command
Queue.
■
To run a command queue file on one or more computers on your network
by using Quick Connect, in the right pane, select the computers on which
you want to run the command queue file, right-click, and then click Start
Command Queue.
Scheduling a command queue file to run automatically
You can add a command queue file to the Windows Task Scheduler so that you
can run the queue file automatically at a scheduled time. Scheduled tasks run in
the background. You should set up the command queue file to automatically
disconnect after the command queue file runs.
See “Selecting end of session options for command queues” on page 185.
Automating file transfer and management tasks
Running a command queue file
194