Symantec NORTON INTERNET SECURITY 2004, User Manual

Page: 111 / 230

Guarding against intrusion attempts
Customize firewall rules
111
To enable Automatic Program Control
1
In the main window, double-click
Personal Firewall
.
2 In the Personal Firewall window, on the Programs tab,
select the Location you want to customize.
3
Check
Turn on Automatic Program Control
.
4 Click OK .
Scan for Internet-enabled programs
Scanning for Internet-enabled programs lets you quickly
customize Internet access for multiple programs.
Program Scan scans the computer for programs that it
recognizes and suggests appropriate settings for each
program.
To scan for Internet-enabled programs
1 In the main window, double-click Personal Firewall .
2 In the Personal Firewall window, on the Programs tab,
click
Program Scan .
3
Select the disk or disks on your computer that you
want to scan.
4 Click Next .
5 In the Program Scan window, review the list of
Internet-enabled programs that Program Scan
identified.
6 Do one of the following:
2
Check the boxes next to the programs you want to
configure.
2
To customize the Internet access settings Program
Scan suggested for a program, select it, then click
Modify
.
2
To leave a program unconfigured, uncheck the box
next to the program. You will receive an alert the
next time this program accesses the Internet.
7 Click
Next
.
8 If you have turned on Network Detector, select the
Locations that should use these settings.
9 Click Finish .
10 Click OK .