Symantec GHOST IMAGING FOUNDATION 7.1, Manual

Page: 140 / 189

Creates a log file to assist in diagnosing GhostCasting and TCP/IP peer-to-peer problems.
The amount of information logged is set by the log level x. The log level x can be E (errors),
S (statistics), W (warnings), I (information), or A (all) in increasing order of logging detail.
The file name indicates the path and file name of the log to be created. In general, the error
and statistic levels do not affect session performance. All other levels may reduce
performance and should be used for diagnostic purposes only. -jl:x=filename
Use unicasting, direct broadcast, or multicasting. -jm=[u|d|m]
Sets to n the number of router hops Symantec Ghost is allowed to cross in an attempt to
find the GhostCast Server. (Default is 16.) -js=n
Limits the Linux swap space to 2GB. -limitswap
Shows the type code and information stored in the BIOS or the Pentium III Processor ID. -lockinfo
Table B-2 shows some examples of type codes and provides example values.
Table B-2
Lockinfo type codes
Value Based On Type
Compaq Manufacturer M
Deskpro EN Series SFF Product name P
Award Software Version V
H925CKH60020 Serial number S
2DA9379B4707D31185E8C800A4F232BC UUID U
Compaq Deskpro EN Series SFF M&P combined C
0000067200028E72A6994A20 PIII ID I
Lets you lock an image file for use with a specific set of computers defined by the type
chosen and the source computer.
For example, ghost -locktype=P creates an image that can be used only on systems that
have the same product name type as the source computer.
On computers with multiple processors, the processorID bios lock option does not work as
intended when running Ghost32.exe. In this situation, do not create or restore images with
the -locktype parameter set to I. Other -locktype values work as intended.
-locktype= Type
The LPT master mode switch causes Symantec Ghost to automatically go into LPT master
mode and is the equivalent of selecting LPT Master from the main menu. -lpm
Command-line switches
Command-line switches
140