Symantec GHOST IMAGING FOUNDATION 7.1, Manual

Page: 114 / 189

3 In the Restoring box, type the maximum MB per minute to set a limit for
restoring an image.
4 In the Creating box, type the maximum MB per minute to set a limit for
creating an image.
The ideal maximum usage to expect is as follows:
300 MB per minute 100 BaseT
60 MB per minute 10 BaseT
Viewing and changing GhostCast Server session
options
In the Options dialog box you can specify session parameters.
You can specify a range of multicast addresses. Addresses in the following range
are valid: 224.0.2.0-239.255.255.255. To specify an exact address, set the end
address to the same as the start address. By setting a wide range of addresses, you
can limit the chance of conflict if you run two or more GhostCast operations
simultaneously. This option should be used by advanced users only.
To view or record GhostCast Server options
1 On the File menu, click Options.
2 If you want to use a specified multicast address range, click Use Specified
Multicast Address Range, then type the multicast From and To addresses.
3 Click Multicast Scope TTL to set the time to live.
This limits how far the data passes through a network. Time to live is
decremented by every router through which the data packet passes.
4 Select one of the following:
Restart the GhostCast Server, accepting clients and
using the same Auto Start parameters. Restart On Completion
Close Symantec GhostCast Server once the session
is complete. Close GhostCast Server On
Completion
Using GhostCasting to create and restore images
Viewing and changing GhostCast Server session options
114