Symantec GHOST IMAGING FOUNDATION 7.1, Manual, Page: 28 / 189

6 When the “Proceed with disk clone?” prompt appears, do one of the following:
Click Yes.
The system performs an integrity check of the file
structure on the source disk, and then copies the
source disk to the destination. If you need to abort
the process, press Ctrl+C, but be aware that this
leaves the destination disk in an unknown state.
To proceed with the disk
cloning.
Click No. To return to the menu.
Warning:
Only click Yes if you are sure that you want to proceed. The
destination disk is overwritten with no chance of recovering any data.
7 Restart the computer.
Warning: You should remove one of the hard disks before you restart your
computer. If you leave two hard disks in the computer, damage can occur to
both of the bootable operating systems.
8 Verify the integrity of the destination disk.
See “Verifying integrity” on page 30.
You can also run Symantec Disk Doctor, Chkdsk, ScanDisk, or a similar utility
to verify the integrity of the destination disk.
Cloning partition to partition
When you clone partition to partition, Ghost.exe copies the contents of one
partition onto another.
To clone from partition to partition
1 On the main menu, do one of the following:
Click Local > Partition > To Partition. Local
Click Partition >To Partition. Peer-to-peer connection
2 In the Source Drive dialog box, select the source disk.
The Source Drive dialog box shows details of every disk that Ghost.exe finds
on the local computer.
Using Symantec Ghost as a stand-alone program
Cloning disks and partitions
28