Symantec GHOST IMAGING FOUNDATION 7.1, Manual

Page: 119 / 189

Table 9-1
GhostCast Server switches (continued)
Description Switch
Sets the multicast address to xxx.xxx.xxx.xxx. Addresses
between 224.0.2.0—239.255.255.255 are valid. -Mxxx.xxx.xxx.xxx
Specifies a range of multicast addresses. The address is chosen
from within this range. Addresses between
224.0.2.0—239.255.255.255 are valid. -Mxxx.xxx.xxx.xxx-xxx.
xxx.xxx.xxx
Specifies the client disk number to which to restore or create
the image file. -DISKnumber
Specifies the client partition number to which to restore or
create the image file. -PARTnumber
Specifies switches to include in the command line and those
used by the Ghost application. -Gswitch
Sets the maximum amount of bandwidth consumed while
restoring an image, where xxx is the number of megabytes
per minute. -HLxxx
Sets the maximum amount of bandwidth consumed while
creating an image, where xxx is the number of megabytes per
minute. -HDxxx
Sets the multicasting time to live. -TTLxxx
Command-line option examples using GhostCast Server
Table 9-2 lists some examples of using GhostCast Server.
Table 9-2
GhostCast Server command-line examples
Description Syntax Summary
Starts a GhostCast session called
labmodel and creates or overwrites
the image file c:\test123.gho. The
first connecting client's IP address
appears on-screen, and the session
starts automatically. The client
computer indicates the source drive
to use for the image file creation. ghostsrv c:\test123.gho labmodel -d Creating an image file of a
complete disk from a client
computer and saving to image
file c:\test123.gho using the
session name labmodel
119 GhostCasting from the command line
GhostCast Server command-line options