Symantec GHOST IMAGING FOUNDATION 7.1, Manual, Page: 76 / 189

This produces a boot-sector file C:\bootos2.dat.
Removing an entry from boot.ini
The syntax to remove an entry from boot.ini is as follows:
gdisk32 /bootini /remove /entry:number [/inifile:filename] [/r]
Table 5-13 lists the remove switches.
Table 5-13
/remove switches
Explanation Switch
Removes the entry from boot.ini. /remove
Removes the ID of the entry from boot.ini. /entry:number
If the entry to be removed is the default boot option, then GDisk removes the
entry and sets the first entry in the remaining list as the default boot entry.
GDisk does not remove the entry if it is the only entry in boot.ini.
Setting the default boot option and timeout
Use the /default switch to set the default boot option and timeout.
The syntax for this command is as follows:
gdisk32 /bootini /default [/entry:number] [/timeout:sec]
[/inifile:filename] [/r]
Table 5-14 lists the default boot option and timeout switches.
Table 5-14
Default boot option and timeout switches
Explanation Switch
Sets the default boot option and timeout. /default
Sets the ID of the entry as the default boot option. /entry:number
Sets the number of seconds before the default boot option is selected. /timeout:sec
Support for large hard-disks
GDisk supports all operations on disks up to 2 TB, and can also wipe disks larger
than 2 TB.
Managing partitions using GDisk
Support for large hard-disks
76