See
“Preparing target computers for management”
on page 49.
See
“About assigning a configuration profile”
on page 85.
To assign a profile to multiple computers manually
1
Open the Intel AMT Systems page.
See
“Understanding the Intel SCS interface”
on page 84.
2
(Optional) In the grid, click the computers to which you want to assign a
profile.
3
Click the Create assignments symbol.
4
If you want to replace existing profile assignments, check Override existing
profile assignments.
This option changes the profile assignment, but does not re-configure the
Intel AMT device with the new configuration profile.
5
If you want to re-configure Intel AMT devices immediately, check
Re-configure Intel AMT if assignments change.
If you do not check this option, you can re-configure manually later.
6
Use the symbols on the toolbar to configure the configuration profile
mappings.
You can assign different profiles to computers from different domains.
7
Click OK.
About monitoring the setup and configuration process
After you assign a profile to the Intel AMT device, the setup and configuration
process starts. You can watch the Intel AMT device status on the Intel AMT
Systems page.
See
“Understanding the Intel SCS interface”
on page 84.
The status of the device must change from UnConfigured to InConfiguring, and
then to Configured.
Also, you can watch the Intel SCS logs for messages.
See
“Viewing Intel SCS logs”
on page 167.
You can troubleshoot the Intel AMT setup and configuration process.
See
“About Intel AMT setup and configuration issues”
on page 173.
When the computers are set up and configured, we recommend that you run the
Resource Synchronization policy manually to synchronize the Intel SCS and
Notification Server databases.
87
Configuring Intel AMT computers for out-of-band management
Configuring Intel AMT computers for out-of-band management
