To install the OOB site server
1
In the Symantec Management Console, on the Settings menu, click
Notification Server > Site Server Settings.
2
In the left pane, click Site Management > Site Servers.
3
In the right pane, under Detailed Information, on the toolbar, click the New
symbol.
4
In the Select Computers dialog box, in the left pane, click the computer that
you want to become the OOB site server, and then click >.
5
Click OK.
6
In the Add/Remove Services dialog box, check OOB Site Service, click Next,
and then click OK.
7
In the left pane, click Site Management > Site Servers > [Site Server Name]
> Services > OOB Site Service.
This page displays the status of the OOB site server installation. Reload the
page if necessary. You can also run additional tasks that are shown on the
page. The tasks can help you troubleshoot the OOB site server installation.
See
“Troubleshooting OOB site server installation”
on page 175.
Uninstalling an OOB site server
You can uninstall an OOB site server.
If you uninstall the OOB site server that is set as default, you must configure Out
of Band Management Component to use another OOB site server.
See
“Configuring the default OOB site server location”
on page 122.
If you uninstall the only OOB site server and Intel SCS in your environment, Out
of Band Management Component becomes unfunctional.
After you uninstall an OOB site server in a subnet, you must re-configure the DNS
server for that subnet to resolve the ProvisionServer host name to the next
available OOB site server.
See
“About configuring DNS”
on page 33.
121
Deploying OOB site servers
Uninstalling an OOB site server