manualshive.com logo in svg

Sylvac D 100S, Instructions For Use Manual

Share
Download
Sylvac D 100S Instructions For Use Manual Download Page 63

63

Outputs:

                                analog 0 to 5 V or -2.5 V to +2.5 V, output current : max 10 mA. Voltage

                                                          error: +/- 4 % max. 0 position : +/- 100mV max.

                                             absolute analog 6 to 10 V with a P10, 0 to 10 V with a P25 / P50.

                                             optocoupled output signals for sort and pneumatic unit D110 command.

                                             Centronics port for link with printer.

       RS-232-C port for linking to computer to computer or printer.

                                              Command for optional multichannel unit D102, D104 ou D108.

Inputs :                                  

       2 external contacts, e.g. supplied foot pedal.

                                             RS-232-Cport for remote command from computer.

Charger : 

                                country specific, supplied in one of the following 4 types :

                                             European standard plug 230 V +/- 10 %  50-60Hz
                                             US standard plug    120 V +/- 10 %  50-60Hz

  

                                             Japan standard plug 100 V +/- 10 %  50-60Hz
                                             UK standard plug  240 V +/- 10 %  50-60Hz
                                             For all 4 models : output 8.5 V / 700 mA or 1100 mA.

Data back-up :        

       Lithium module 3V 175 mAh Renata type 175-OB. Lifetime

                                                          approx. 10 ans.

Autonomy :

                                approx. 8 hrs. Autonomy is reduced at higher working temperatures.

                                             At 40° autonomy is reduced by 70 % compared to 25 °C.

Charge :

                                15 hrs minimum. The charger can be connected permanently without damaging

                                              the accumulators.

Self discharge of accumulators :       loos of 30 % of accumulator capacity per month. Do not leave accumulators
                                                          completely uncharged.

Lifetime of accumulators :                 approx.4 to 5 years

1.13 DELIVERY

Packaging in synthetic material :

                                 Order No

1 D100S unit (with accumulator)

                                                          804.1101

1 charger 

       European 230V

                                              904.4010

                                             UK  240V      

                                              904.4011

                                US 120V

                                                           904.4012

                                             Japan100V                                                            904.4013

1 foot pedal for external contact

                                                           904.4101

1 base (to increase incline)

1 instructions manual

Summary of Contents for D 100S













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands