22
1.6.7 TOL KEY
Displays or removes tolerance indicators :
indicates a measured value smaller than the nominal dim negative tolerance on the external
measurement or smaller than the n positive tolerance on the internal measurement.
indicates a measured value inside the limits of tolerances.
indicates a measured value larger than the nominal dim positive tolerance on the external
measurement or larger than the nominal dim negative tolerance on internal measurement.
This indication is also transmitted to the corresponding opto-coupler for external command purposes.
(
refer to section 1.8.3
).
Each channel has its own tolerances.
Input of nominal dimension and tolerances :
1/ select the channel.
2/ press
Setup
key.
3/ then
Tol
key.
The following will be displayed (the current nominal dimension is displayed) :
The
Clear
key allows you to quit the tolerances input.
4/ input nominal dimension.
Wrong value entered can be cancelled by pressing
Clear
key.
The value is entered as described in section 1.3.3. (input of values).
5/ confirm by pressing
Enter
key.
The following will be displayed :
Summary of Contents for D 100S
Page 2: ...2 ...
Page 76: ...76 Edition 2005 12 V1 4 SYL D100S E 681 038 110 ...
