SWASH SFF1000CSA series, Technical Education

Page: 37 / 50

DIAGNOSTICS & TROUBLESHOOTING
SWASH™ Clothing Care System
n
4-3
For Service Technician Use Only
Customer Troubleshooting
Nothing happens when you push the 10 or 15
minute button
¾
Check to make sure the SWASH™ system is plugged into a
power outlet.
¾
If SWASH™ system is plugged in, unplug it and plug it back
in to reset.
SWASH™ system does not work as well as expected
¾
Select the recommended cycle based on your clothing type.
¾
Keep longer clothes from laying on the bottom of the
device.
¾
SWASH™ system is only recommended for 2 lightweight
items. For best results, refresh only one item at a time.
¾
Do not operate, install, or store the SWASH™ system where
it will be exposed to water, weather, or at temperatures
below 50° F (10° C). Let the SWASH™ system and SWASH
PODS™ cups warm up to room temperature before use.
You have a spot on your clothing after a cycle.
¾
The SWASH PODS™ formula may leave a spot on some
fabrics. These spots are easily removed when clothes
are washed or dry-cleaned according to clothing
manufacturer’s care label.
1. Orange light is blinking - SWASH™ system will
not start
¾
Make sure door is closed properly.
¾
Make sure cup is loaded in bay. If cup is empty or missing,
replace with new cup. Use only SWASH PODS™ cups in your
SWASH™ system.
2. Orange and blue lights are blinking
¾
The reservoir is full and needs to be emptied, or is missing
and needs to be replaced. See emptying the reservoir on
page 2-8.
3. Orange and white lights on
¾
If orange and time remaining lights are solid. SWASH™
system is paused. Close door and cycle will resume.
4. Orange light blinking and white lights on
¾
If orange light is blinking and at least two white lights
are solid, SWASH™ system is not working. See Section 4,
“Diagnostics and Troubleshooting.”
Customer Error Codes