3-4
n
SWASH™ Clothing Care System
COMPONENT ACCESS
Removing the Rear Panel
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
1.
Unplug the SWASH™ Clothing Care System.
2.
Locate the reservoir at the rear base of the unit.
3.
Remove the reservoir and set aside.
Figure 2
4.
Remove back cover. Using a T-20 TORX driver, remove the
9 screws securing the back cover to the SWASH system
(see Figure 2).
Figure 2
5.
Set aside back panel for reinstallation.
Reservoir
Summary of Contents for SFF1000CSA series
