A-96.250.231 / 130421
AMI Turbitrack
Program List and Explanations
52
2.2.2
Miscellaneous
2.2.2.1
Case Temp.
: Temperature in °C inside the housing of the AMI trans
-
mitter.
2.2.2.1
Dew point:
Calculated dew point in °C inside the housing of the
turbidimeter.
2.2.3
History
2.2.3.1
Ver. history:
Only for diagnostic purpose. Review the values of the
last verifications. Max. 64 data records are memorized.
2.2.3.1.1
Number
: Verification counter.
Date, Time
: Date and time of the verification.
Actual value
: The measuring value of the verification.
Setpoint
: The value printed on the label of the verikit.
Deviation
: Shows the deviation in % from the setpoint.
2.3 Sample
2.3.1
Sample ID:
Shows the identification assigned to a sample. This iden
-
tification is defined by the user to identify the location of the sample.
Sample flow:
Flow in l/h
2.4 I/O State
2.4.1- 2.4.2
Shows the actual status of all in- and outputs.
2.5 Interface
Only available if optional interface is installed.
Review programmed communication settings.
3 Maintenance
3.1 Verification
3.1.1
Press [Enter] to start the verification and follow the instructions on
the screen. Further details see
Alarm Relay:
Active or inactive
Relay 1 and 2:
Active or inactive
Input:
Open or closed
Signal Output 1 and 2:
Actual current in mA
Signal Output 3:
Actual current in mA (if option is installed)
