A-96.250.231 / 130421
AMI Turbitrack
Installation
19
3
Push in the knob to lock the valve in closed position.
4
Unscrew and remove the tube fittings [B] of the capillary [C].
5
Then screw in the tube fittings of the 186 mm capillary.
6
Tighten them well.
The capillary determines the flow resistance and the maximal flow
rate. With the pressure regulator at the inlet side of the capillary the
flow rate can be adjusted within the given range, see diagram below.
The standard capillary is an FEP tube with an inner diameter of
1 mm and a length of 500 mm. If you have a low sample pressure or
you need a high sample flow, a shorter capillary with 186 mm length
can be used.
0
0
5
10
15
20
25
30
35
40
0.5
1
ba
l/h
1.5
2
2.5
3
3.5
186
500
