manualshive.com logo in svg

Swann 24 ChannelDigital Video Recorder, User Manual, Page: 7 / 62

Share
Download
Swann 24 ChannelDigital Video Recorder User Manual Download Page 7

7

CONNECTING THE DVR

EN

7

DVR Front Panel

NAME

DESCRIPTION / PRESS THE BUTTON TO ...

1

Power button

Turn the DVR on or off.

2

USB Port

For connecting a USB mouse or a USB storage device.

3

DVD drive

Slot for installing a rewritable DVD drive to save recordings.

4

Open/Close 

button

Open or close the DVR-RW disc tray if installed.

5

LED Indicators

POWER: Green indicates the DVR is powered up. Red indicates the DVR is in standby mode.

READY: Green indicates the DVR is functioning properly.

STATUS: Red indicates the SHIFT function is enabled.

ALARM: Red indicates a sensor alarm is detected.

HDD: Blinking red indicates data is being read from or written to the hard drive. 

Tx/Rx: Blinking green indicates the DVR’s LAN port is sending or receiving information.

6

Directional

buttons

Menu mode: Navigate through fields and items in the menus.
Live View mode: Cycle through video channels.
Playback mode: Use Up/Down to speed up or slow down playback.
All-day Playback mode: Press Left/Right to select the recorded video of next/previous day.
Playback by Normal Video Search: Press Left and Right buttons to select the next/previous 

recorded file. 
PTZ mode: Control the movement of a PTZ camera.

Enter button

Select options in a menu and to control playback.

7

Shift button

Enable alphanumeric button input on the DVR front panel. The STATUS indicator becomes red 

when in alphanumeric button mode.

8

9

7

6

5

1

3

2

4

Summary of Contents for 24 ChannelDigital Video Recorder































































Reviews:

No comments