manualshive.com logo in svg

Swann 24 ChannelDigital Video Recorder, User Manual, Page: 46 / 62

Share
Download
Swann 24 ChannelDigital Video Recorder User Manual Download Page 46

46

ADVANCED CONFIGURATION

EN

Camera Management: PTZ: More Settings

PTZ Controls

Arrows: Moves the camera in the direction selected.
Zoom: Increases or decreases the magnification of a vari-

focal lens. Not all PTZ devices have a vari-focal lens.
Focus: Alters the focal point of a PTZ device with a vari-focal 

lens. Try adjusting this control if your images appear soft or 

blurry. Not all cameras support this function.
Iris: Alters how much light gets into the camera by opening 

and closing the iris of the camera. Not all cameras support 

this function.

More Settings

Camera: Select the channel that the PTZ camera is 

connected to.
Save Preset: Defines a preset point.
Call Preset: Returns the camera to a preset point.
Pattern: Can be set by recording the movement of the 

camera. 
Patrol: Can be used to move the camera to different key 

points. The duration and speed can be set for each key 

point.
 

RS485 Controls

To access the camera’s OSD, press the + Iris button. Press 

the up and down arrow buttons to navigate the menu and 

press the + Iris button to confirm your selection.

 

There are many options available 

in the OSD menus - many more than 

we can talk about here, and we’re 

constantly adding or tweaking 

options to ensure you have the best 

experience possible. 

Download a guide to the advanced 

OSD features of this camera from 

 

www.swann.com/osdpro

 if you want to 

know more.

Summary of Contents for 24 ChannelDigital Video Recorder































































Reviews:

No comments