manualshive.com logo in svg

Swann 24 ChannelDigital Video Recorder, User Manual, Page: 18 / 62

Share
Download
Swann 24 ChannelDigital Video Recorder User Manual Download Page 18

18

BASIC SETUP

EN

The Main Menu

Playback: To access recorded images, use the Playback 

menu. There are several playback modes to choose from, 

such as standard chronological playback mode, or event 

playback mode.
Export: To copy or backup footage from the DVR, use the 

Export menu. You’ll need a compatible USB Flash Drive to 

store the data (FAT32 file format only).
Manual: Access manual controls for the recording and 

alarm functions of the DVR.
HDD: Where you’ll be able to access information about and 

adjust the settings of your hard drive.
Record: Access recording options, such as quality, 

resolution, bitrate and the recording schedule.

Camera:  Adjusts and configures how the DVR looks for 

cameras via the video inputs. Access to Motion Detection 

configuration is located here.
Configuration: Access and configure many settings of the 

DVR, including your network settings, adjusting the time 

and date and creating or altering user accounts.
Maintenance: For changing how the DVR performs its 

automatic maintenance and for upgrading the DVR’s 

firmware.
Shutdown: If you want to shut down or reboot the DVR, or 

simply log out of the user account you’re logged in as, click 

the Shutdown button. To ensure the integrity of your data 

and recordings, always select Shutdown when powering 

off the DVR.

Summary of Contents for 24 ChannelDigital Video Recorder































































Reviews:

No comments