35
ADVANCED CONFIGURATION
EN
35
Playback: Event/Tag
The Event Search menu (above) will show you recordings
that were triggered by either an alarm sensor being
triggered or the DVR detecting motion.
The Tag Search menu (below) will isolate video events
based on the tag information that video carries. It’s similar
to Event playback, but it can be easier to group multiple
recordings of a similar type.
The menu controls allow you to
select full screen detection or to
enable smart search.
Right click in the play area to
access the
Smart Search
function.
T
he DVR’s Smart Search function appears in the mouse
menu when you select only one camera for playback .
The Smart Search function allows you to select an area of
the video that may have detected motion. The DVR will then
display these areas of motion with a green highlight on the
timeline (see above). This makes it very easy to navigate to
the sections of video that has motion recording related to
that area.
•
Use the mouse to move the cursor around the screen.
•
Click and drag to select the area you want to search for.
•
You will see a grid of red boxes. The outlined boxes
mark the area that you want to select to search for
motion.
•
By left clicking an area in the grid, you can toggle
motion detection ON or OFF in that location.
•
Multiple areas of the video can be selected.
Playback: Smart Search