Swan Analytical Instruments AMI INSPECTOR Conductivity, Operator'S Manual

Page: 47 / 70

AMI INSPECTOR Conductivity
Program Overview
A-96.250.611 / 120617
45
Relay 1/2 Function 5.3.2.1/ 5.3.3.1*
5.3.2/5.3.3* Parameter 5.3.2.20/ 5.3.3.20*
Setpoint 5.3.2.300 / 5.3.3.300*
Hysteresis 5.3.2.400/ 5.3.3.400*
Delay 5.3.2.50/ 5.3.3.50*
Input Active 5.3.4.1*
5.3.4* Signal Outputs 5.3.4.2*
Output/Control 5.3.4.3*
Fault 5.3.4.4*
Delay 5.3.4.5*
Miscellaneous Language 5.4.1*
5.4* Set defaults 5.4.2*
Load Firmware 5.4.3*
Password Messages 5.4.4.1*
5.4.4* Maintenance 5.4.4.2*
Operation 5.4.4.3*
Installation 5.4.4.4*
Sample ID 5.4.5*
Interface Protocol 5.5.1*