![Suzuki GSF600K1 2001 Service Manual Download Page 25](http://html1.mh-extra.com/html/suzuki/gsf600k1-2001/gsf600k1-2001_service-manual_1408586025.webp)
2-12 PERIODIC MAINTENANCE
2nd step:
• Loosen the locknut
1
of the throttle pulling cable
2
.
• Turn the adjuster
3
in or out until the throttle cable play (at the
throttle grip)
A
is between 2 – 4 mm (0.08 – 0.16 in).
• Tighten the locknut
1
while holding the adjuster
3
.
3rd step:
• While holding the throttle grip at the fully closed position, slowly
turn out the adjuster
4
of the throttle returning cable
5
until
resistance is felt.
• Tighten the locknut
6
while holding the adjuster
4
.
%
Throttle cable play
A
: 2 – 4 mm (0.08 – 0.16 in)
+
After the adjustment is completed, check that handlebar
movement does not raise the engine idle speed and that
the throttle grip returns smoothly and automatically.
NOTE:
Major adjustments can be made at the carburetor side adjuster.
CARBURETOR SYNCHRONIZATION
Inspect initially at 1 000 km (600 miles, 1 month) (E-33
only) and every 12 000 km (7 500 miles, 12 months).
(
$
4-23)
EVAPORATIVE EMISSION CONTROL SYS-
TEM (E-33 ONLY)
Inspect every 12 000 km (7 500 miles, 12 months).
Replace vapor hose every four years.
Summary of Contents for GSF600K1 2001
