CHASSIS 5-7
• Install the new O-ring
1
, washer
2
and spring
3
.
• Install the brake cam lever as shown.
• Tighten the brake cam lever nut to the specified torque.
&
Brake cam lever nut: 11 N·m (1.1 kgf-m, 8.0 lb-ft)
• Apply SUZUKI SUPER GREASE “A” to the brake cam and
pin, and install the brake shoes.
%
99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
'
REMOUNTING
Remount the front wheel in the reverse order of removal. Pay
attention to the following points:
• Align the rib
1
on the left fork leg with the slot
2
on the brake
panel.
FRONT AXLE
• Tighten the front axle nut to the specified torque.
&
Front axle nut: 35 N·m (3.5 kgf-m, 25.5 lb-ft)
• Install the new cotter pin.
• Adjust the front brake lever play. (
!
2-14)
Be careful not to apply too much grease to the cam
and pin. If grease gets on the lining, brake slippage
will result.
Summary of Contents for DR 125
Page 1: ...DR Z125 L 9 9 5 0 0 4 1 1 2 5 0 1 E...
Page 34: ...PERIODIC MAINTENANCE 2 21...
Page 167: ...SERVICING INFORMATION 7 9 WIRING DIAGRAM...
Page 222: ...Printed in Japan K3 K4 K5 K6 K7 K8...
