3-50 ENGINE
• Install the washer and primary drive gear/oil pump drive gear
nut.
NOTE:
This nut
1
has left hand threads.
• Tighten the primary drive gear/oil pump drive gear nut
1
to
the specified torque with the special tool.
&
09930-40113: Rotor holder
"
Primary drive gear/oil pump drive gear nut:
50 N·m (5.0 kgf-m, 36.0 lb-ft)
• Bend the lock washer securely.
OIL PUMP
• Apply engine oil to the sliding surfaces of the oil pump case,
outer rotor, inner rotor and shaft, before mounting the oil
pump.
• Apply a small quantity of THREAD LOCK “1342” to the oil
pump mounting screws and tighten them.
+
99000-32050: THREAD LOCK “1342”
• Install the pin
1
.
• Install the oil pump driven gear
2
and E-ring
3
.
Summary of Contents for DR 125
Page 1: ...DR Z125 L 9 9 5 0 0 4 1 1 2 5 0 1 E...
Page 34: ...PERIODIC MAINTENANCE 2 21...
Page 167: ...SERVICING INFORMATION 7 9 WIRING DIAGRAM...
Page 222: ...Printed in Japan K3 K4 K5 K6 K7 K8...
