ENGINE 3-11
• Remove the cylinder head bolts diagonally.
• Remove the cylinder head.
NOTE:
If the cylinder head does not come off, lightly tap on the finless
portion of it with a plastic hammer.
CYLINDER
• Remove the gasket
1
.
• Remove the cam chain guide
2
.
• Remove the cylinder by removing the nuts.
NOTE:
If the cylinder does not come off, lightly tap on the finless portion
of it with a plastic hammer.
PISTON
• Place a clean rag over the cylinder base to prevent the piston
pin circlip
3
from dropping into the crankcase. Then, remove
the piston pin circlip
3
.
• Remove the piston pin.
NOTE:
Use the special tool if necessary.
!
09910-34510: Piston pin puller
• Remove the piston.
GENERATOR COVER
• Remove the generator cover.
Summary of Contents for DR 125
Page 1: ...DR Z125 L 9 9 5 0 0 4 1 1 2 5 0 1 E...
Page 34: ...PERIODIC MAINTENANCE 2 21...
Page 167: ...SERVICING INFORMATION 7 9 WIRING DIAGRAM...
Page 222: ...Printed in Japan K3 K4 K5 K6 K7 K8...
