Suzuki DR 125, Service Manual

Page: 43 / 222

ENGINE 3-7
• Install the clutch release arm as shown in the illustration.
NOTE:
Align the release arm slit surface
A
with the notch mark
B
on
the release camshaft.
• Install the engine sprocket with drive chain as shown.
#
• Tighten the engine sprocket bolt to the specified torque.
"
Engine sprocket bolt: 25 N·m (2.5 kgf-m, 18.0 lb-ft)
NOTE:
When tightening the engine sprocket bolt, depress the brake
pedal.
• Install the gearshift cam lever to the gearshift shaft in the cor-
rect position.
$%
Gearshift arm angle
C
: Approx. 12 °
The drive chain joint clip should be attached in the
way that the slit end will face opposite to the direction
of travel.
Direction of travel