3-48 ENGINE
• Tighten the crankcase bolts to the specified torque.
!
Crankcase bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
NOTE:
* After the crankcase bolts have been tightened, make sure that
the crankshaft, countershaft and driveshaft rotate smoothly.
* If these shafts do not rotate smoothly, try to free it by tapping
with a plastic hammer.
• Install the gearshift cam stopper.
• Apply SUZUKI SUPER GREASE “A” to the O-ring of the
engine sprocket spacer and the oil seal lip. When installing
the engine sprocket spacer onto the driveshaft, face the
grooves
A
toward inside.
"
99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
#
CAM CHAIN/GENERATOR STATOR
• Install the cam chain.
• Remove any grease from the tapered portion of the generator
rotor and crankshaft.
• Install the generator rotor key
1
.
Use a new O-ring.
Summary of Contents for DR 125
Page 1: ...DR Z125 L 9 9 5 0 0 4 1 1 2 5 0 1 E...
Page 34: ...PERIODIC MAINTENANCE 2 21...
Page 167: ...SERVICING INFORMATION 7 9 WIRING DIAGRAM...
Page 222: ...Printed in Japan K3 K4 K5 K6 K7 K8...
