Bringing the Benefits of Real-Time Data Collection to the World
Sutron Corporation, 22400 Davis Drive, Sterling, Virginia 20164-4444
37
6. Installation
The ACCUBAR
®
will return accurate and reliable pressure data in any mounting position. We recommend,
however, mounting the sensor with the connector and cable gland pointing downward. This will prevent
any moisture from following the cable or tubing down to the ACCUBAR
®
sensor.
The ACCUBAR
®
mounts to a panel or surface through two holes that are accessible under the sensor cover.
The through-holes accommodate #8, #6 or M4 hardware.
The ACCUBAR
®
barometric pressure fitting is a hose barb for a 3/16" ID tubing.
The terminal block accommodates wire sizes from 28 AWG to 16 AWG or up to 1 mm2. The
recommended length of bare wire is 0.22" or 5.5 mm.
