Bringing the Benefits of Real-Time Data Collection to the World
Sutron Corporation, 22400 Davis Drive, Sterling, Virginia 20164-4444
39
Pressure = units units scale * (field calibration scale *(press. in mB - calibration offset))
where:
press. in mB is the factory calibration pressure as returned by the M1 command.
calibration offset is entered by the XC command
calibration scale is entered by the XC command
field offset is entered by the XE or XS commands
units scale and units offset are set by the combination of the XUP and XUU commands.
Note: Calibration scale and calibration offset can be determined via the M4 command.
Note: The current value of field offset, user units offset, and user units scale can be determined via the M3
command.
