manualshive.com logo in svg

Supermicro SUPERSERVER 9029GP-TNVRT, User Manual, Page: 87 / 145

Share
Download
Supermicro SUPERSERVER 9029GP-TNVRT User Manual Download Page 87

Chapter 6   UEFI BIOS 

87

SATA Port 0 – SATA Port 7

Hot Plug

Select Enable to support Hot-plugging for the device installed on a selected SATA port 
which will allow the user to replace the device installed in the slot without shutting down 
the system. The options are

 Enable 

and Disable.

Spin Up Device

On an edge detect from 0 to 1, set this item to allow the SATA device installed on the SATA 

port specified by the user to start a COMRESET initialization. The options are Enable and 

Disable

.

SATA Device Type

Use this item to specify if the device installed on the SATA port selected by the user should 
be connected to a Solid State drive or a Hard Disk Drive. The options are 

Hard Disk Drive

 

and Solid State Drive. 

sSATA Configuration

When this submenu is selected, the BIOS automatically detects the presence of the sSATA 
devices that are supported by the Intel PCH chip and displays the following items:

sSATA Controller

This feature enables or disables the onboard SATA controller supported by the Intel PCH 
chip. The options are 

Enable

 and Disable. 

Configure sSATA as 

(Available when SATA Controller is enabled)

Select AHCI to configure a SATA drive specified by the user as an AHCI drive. Select RAID 
to configure a SATA drive specified by the user as a RAID drive. The options are 

AHCI

 and 

RAID. If this is set as RAID, the following two options appears.

SATA/sSATA RAID Boot Select

Select the boot capability for SATA and sSATA RAID controllers. The options are None, 
SATA Controller, 

sSATA Controller

, and Both.

sSATA RAID Option ROM/UEFI Driver

Select EFI to load the EFI driver for system boot. Select Legacy to load a legacy driver for 
system boot. The options are 

Legacy

, EFI, and Disable.

SATA HDD Unlock 

(Available when SATA Controller is enabled)

Select Enable to unlock SATA HDD password in the OS. The options are 

Enable

 and Disable.

Aggressive Link Power Management

When this item is set to Enabled, the SATA AHCI controller manages the power use of the 
SATA link. The controller will put the link in a low power mode during an extended period of 

Summary of Contents for SUPERSERVER 9029GP-TNVRT


















































































































































Reviews:

No comments