47
Chapter 3: Component Installation and Maintenance
Removing a Bridge Assembly
1.
Hold the bridge assembly with both hands, fingers under the assembly and thumbs on
top of the latch.
2. Keeping the assembly strictly perpendicular, squeeze to pull the latch down while pulling
the assembly straight out from the GPU trays.
Switch Trays
Installing Switch Trays
1. Note that the release levers on each side must be in the fully open position. (Fig 3-11)
2. Slide each tray into the chassis.
3. Push the two levers simultaneously into the chassis until they snap into place.
4. Secure each lever with a screw.
Figure 3-13. Installing an NVLink Bridge Assembly