SuperServer 9029GP-TNVRT User's Manual
46
Installing the NVLink Bridges
After both GPU trays are installed, they must be connected by the NVLink bridge assemblies.
Figure 3-12. NVLink Bridge Assembly
(front and back)
Installing a Bridge Assembly
1. Orient the bridge assembly, noting the word "TOP" printed on the top.
2. With the latch mechanism in the Release position, hold the bridge assembly with both
hands, fingers under the latch mechanism and thumbs on top of the assembly.
3. Align the two poles on the contact side of the bridge assembly with the two holes in the
rear of the GPU trays. Keeping the assembly strictly perpendicular, push it into the GPU
trays until the latch mechanism snaps into place. (Figure on next page)
Caution
: Do not tilt the assembly as you install or remove it to protect delicate parts.
Align-
ment
Poles
Latch
Mechanism