23
Chapter 2: Rack Installation
Figure 2-2. Installing the Left Rail
2.3 Installing the Server
Caution
: The assembled system may weigh over 400 lbs. Use a lift and multiple people to
move it.
1. If you want to install the optional chassis handles, use screws including a thumbscrew
through the bottom hole of each handle.
Note:
These handles need only be installed
when mounting the system into a short rack. When mounting into a deep rack, they are
unnecessary and regular screws should be used instead of thumbscrews.
2. Using a lift and as many people as necessary, lift the system and slide it onto the
installed rails.
3. After pushing the enclosure all the way into the rack, use the thumbscrew on each side
of the server to lock it into place.