SuperServer 9029GP-TNVRT User's Manual
102
When SEL is Full
This feature allows the user to specify what the BIOS should do when the system event log
is full. Select Erase Immediately to erase all events in the log when the system event log is
full. The options are
Do Nothing
and Erase Immediately.
Note
: Reboot the system for the changes to take effect.
BMC Network Configuration
The current configuration is displayed.
•
IPMI LAN Selection
•
IPMI Network Link Status
•
Current Configuration Address Source
•
Station IP Address
•
Subnet Mask
•
Station MAC Address
•
Gateway IP Address:
•
VLAN
Update IPMI LAN Configuration
Select Yes for the BIOS to implement all IP/MAC address changes at the next system boot.
The options are
No
and Yes.
If the item above is set to Yes, the following items become available for configuration:
IPMI LAN Selection
Use this feature to select the type of the IPMI LAN. The options are Dedicated, Shared,
and
Failover
.
VLAN
Select Enabled for IPMI VLAN support. The options are
Disabled
and Enabled.
If the item above is set to Enabled, the following item become available for configuration:
VLAN
Select a VLAN ID (0–4093). If set to 0, VLAN is disabled.
Configuration Address Source
Use this feature to select the IP address source for this computer. The options are
DHCP
and Static.
If DHCP is selected, BIOS will search for a DHCP (Dynamic Host Configuration Protocol)
server attached to the network and request the next available IP address for this computer.