manualshive.com logo in svg

Supermicro SUPERSERVER 9029GP-TNVRT, User Manual, Page: 68 / 145

Share
Download
Supermicro SUPERSERVER 9029GP-TNVRT User Manual Download Page 68

SuperServer 9029GP-TNVRT User's Manual

68

5.4 IPMI

The X11DPG-HGX2 supports the Intelligent Platform Management Interface (IPMI). 
IPMI provides remote access, monitoring and management through the baseboard 
management controller (BMC) and other management controllers distributed among 
different system modules. There are several BIOS settings that are related to 
IPMI. For general documentation and information on IPMI, visit our website at: 

http://www.supermicro.com/products/nfo/IPMI.cfm.

BMC ADMIN User Password

For security, each system is assigned a unique default BMC password for the ADMIN user. 
This can be found on a sticker on the chassis and a sticker on the motherboard. The sticker 
also displays the BMC MAC address.

Figure 5-5. BMC Password Label

See Chapter 1, Section 1.4 for the location of the label.

Summary of Contents for SUPERSERVER 9029GP-TNVRT


















































































































































Reviews:

No comments