SUNWARD SWE150F Operation & Maintenance Manual Download Page 158

Page: 158 / 216

151

Warning

Exposed

hydraulic

oil

and

lubricant can cause fire and injury to

person.

To avoid this hazard:



Stop the machine to firm level ground, lower
bucket to ground.



Stop the engine, remove key from starting
lock, set pilot safety lock lever to LOCK
position.



Check hose for any twist, abrasion, check
hose clamp for looseness or lost. Check
damages of cooler. Check flange for looseness,
and oil leakage.



When clamping, repairing or replacing any
loosened, damaged, lost hose clamp, hose,
pipe, oil cooler and its flange bolt, do not bend
or hit high-pressure hose, do not install twist
or damaged hose or piping.

Summary of Contents for SWE150F

























































































































































































































Search results

Summary of Contents for SWE150F

Reviews:

Related manuals for SWE150F

Brands by name

Popular brands

SUNWARD SWE150F, Operation & Maintenance Manual

Search results

Summary of Contents for SWE150F

Reviews:

Related manuals for SWE150F

Brands by name

Popular brands