108
3.4.5 Starting engine
Warning
Do not start the engine, if any signs
or marks are posted to joysticks in
the cab.
Do not start the engine by
short-circuiting the engine starting
circuit.
Do not start the machine without
operator seated.
Make sure the surrounding area is
clear of person and obstacles before
starting the engine. Sound the horn to
warn people.
Do not start the machine in a confined
area.
Exhaust gas is toxic, when starting
the engine in a confined area, be
careful to ensure good ventilation.
Note
Throttle knob should be set to MIN
position before starting the engine.
Do not keep the starting motor running
continuously for longer than 5
seconds. If the engine fails to start,
wait 2 minutes before a new attempt.
Start the engine in normal weather
condition
Set pilot safety lever to LOCK position.
Turn throttle knob to low speed position.
Shift starting key to “ON” position to “start”
position to start the engine.
With engine started, release the starting switch
key, the key will return to “ON” position
automatically.
The engine oil pressure is displayed in screen,
check engine oil to ensure it’s within specified
range. If yes, you are allow to operate. If no,
find out the problem and do not operate until
the problem is cleared. You could stop the
engine to help find the problem if necessary.
Summary of Contents for SWE150F
